The WisePack Dimming Receiver is a single channel receiver capable of dimming up to a 500W load using a wireless switch or remote.
Internal memory restores previous dimming level
2 way dimming or more
No back box required. Add switches anywhere without the need to wire
Up to 16 switches per receiver
The maximum load you can dim on the WisePack Dimming is 500W. You can dim mains or low voltage light fittings. The switch can operate from 200m away from the receiver, this will be reduced if the radio signal travels through many walls.
You can program any one button wise switch to turn the circuit on and off. A quick press will switch the lights on, while another quick press will switch them off again. Holding the button down will gradually dim the circuit.
A 2 button switch can be programmed to have the first button as an 'On' function and the second button as an 'Off' function. This allows you to have a master 'On' and master 'Off' button when linking to more than 1 dimming pack. Alternatively, linking to extra packs with a 2 button switch, you can make button 1 on/off for pack 1 and button 2 on/off for pack 2.
A 4 button switch can allow you to have a master 'On', and master 'Off' button twice. This means that if required, a number of receiver packs can be switched/dimmed seprerately in two groups. For example, ceiling fittings can have a different master button than the wall fittings.
This product is not suitable for use with 'Aurora' transformers.
Max Wattage / Circuit 500W
IP Rating IP20